Configuring Gatekeeper Settings - Avaya RADVISION Scopia XT5000 Installation Manual

Configuring Gatekeeper Settings

About this task
This is typically not relevant for IP Office deployments. Configure only if you are using a gatekeeper in
your deployment.
If you are not using a gatekeeper in your deployment, select Done.
A gatekeeper routes audio and video H.323 calls by resolving dial strings (H.323 alias or URI) into the IP
address of an endpoint, and handles the initial connection of calls. If your Scopia XT Server for IP Office
works in conjunction with a gatekeeper, configure gatekeeper-related settings as described in this
procedure.
This procedure completes the basic system configuration.
If you are modifying these settings after initial setup, navigate to Configure > Network > H.323 from the
Main menu. For more information, see
on page 84.
Before you begin
This procedure is performed as part of the basic configuration after
page 58. Consult with your network administrator to configure these fields.
Access the quick setup wizard from the endpoint or web interface, as described in
Setup Procedure
Procedure
1. Set the Use Gatekeeper list to Yes.
2. Set the Mode list to Manual.
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2
Registering the Scopia XT Server for IP Office with a Gatekeeper
on page 53.
Figure 32: Gatekeeper settings
Configuring Network Settings
Accessing the Quick
Initial Configuration | 60
on