Avaya RADVISION Scopia XT5000 Installation Manual page 107

Before you begin
• Turn on the Scopia XT Server for IP Office unit.
• Verify that you have the four-digit PIN code required to make changes to the system settings. The
default PIN code is 1234.
• Connect a monitor to system so that you can manage the system from the endpoint's own
interface, as described in
Procedure
1. From the endpoint's main menu, select Configure > General.
2. Set Show Advanced Settings to Yes.
3. Press the
4. Select Advanced.
5. Enter your four-digit PIN code, and press ok/menu. The default PIN code is 1234.
6. Select Utilities > Restore System > Factory Defaults.
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2
Connecting a Monitor to the XT Server
Figure 66: Enabling advanced settings
Back key on the XT Remote Control Unit.
on page 25.
Troubleshooting the Scopia XT Server for IP Office | 107