Chapter 6 | Initial Configuration
After connecting the system and powering it on as described in
24, perform the initial configuration as described in these sections:
Navigation
•
How to Control the XT Server
•
Registering and Enabling your Scopia XT Server for IP Office license
•
Performing Basic Configuration
•
Registering the XT Server to IP Office
•
Configuring Call Settings
•
Setting Basic System Information
•
Configuring Network Settings
How to Control the XT Server
You can set up and control your XT Server, as well as make calls, in the following ways:
• From the endpoint's main menu, using your XT Remote Control Unit (see
Control Unit
To use the XT Remote Control Unit to manage the system, you must first connect a monitor, as
described in
system from the web interface only (see
28).
• From the XT Server's web interface (see
Before performing initial configuration, we recommend reading the following topics to familiarize yourself
with how to control the XT Server:
Navigation
•
Managing your XT Server from the Web Interface
•
Managing your XT Server Locally from the Endpoint
Managing your XT Server from the Web Interface
You can configure and control the XT Server remotely using the web interface:
• Perform administrative tasks, such as:
–
–
• Change basic settings, such as the interface language (for details, see
Configuration
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2
on page 28
on page 52
on page 61
on page 63
on page 66
on page 76
on page 40 and
Accessing the Main Menu of the XT Server
Connecting a Monitor to the XT Server
Monitoring the status
Backing up the endpoint's configuration files
on page 52)
Setting up the Scopia XT Server for IP Office
on page 47
on page 25. Otherwise, you can manage the
Managing your XT Server from the Web Interface
Accessing XT Server Web Interface
on page 28
on page 39
on page
Using the XT Remote
on page 39).
on page
on page 34).
Performing Basic
Initial Configuration | 28