Grab - NewTek TriCaster Mini User Manual

4. Click Close.
5. Make sure you have an active source playing on Program output.
6. Press the Record button. It will illuminate, and the neighboring timecode field will
begin keeping track of the duration of your recording.
7. After a little while, press Record again to stop recording.
This configuration will record everything that is displayed on Output 1, letting you
capture your entire live production for posterity if you like. It also provides a way for
you to capture clips for playback (from TriCaster's DDRs) during your live events.
FIGURE 64
Hint: Notice that the nearby counter increments with each Grab performed.
8. As before, click the Configure button (gear) to open a setting panel for the Grab
feature.
The De-interlace option smooths the results for fielded format session, and is
enabled by default.

4.8.2 GRAB

The Grab feature is similar to Record, just described - except
of course that it grabs fresh still images from each time you
click the Grab button.
Page | 77