NewTek TriCaster Mini User Manual page 378

DELEGATES
The Positioner section allows you to adjust position attributes for any video layer in
the Switcher or any M/E effect using the Joystick. Positioner delegates are in two
groups at left.
The first Positioner delegate group consists of eight buttons, one for each of the
primary M/E input layers (A-D) and KEY layers. These delegate Joystick operations to
the corresponding layers in the M/Es currently selected M/Es in the M/E DELEGATE
group. The second Positioner delegate group relates to the four DSK layers of the main
Switcher.
Hint: See Section 22.3.13 for information on controlling PTZ cameras with the joystick.
J D
OYSTICK ELEGATES
The type of operation applied to delegated video
layers is further modified by button selections in other
sections of the control surface.
Hint: For finer control, hold down CTRL when operating
FIGURE 339
the joystick. This will increase its sensitivity by a factor of
10.
Two joystick mode buttons are placed separately at left. LiveSet Zoom and SHTL
(Shuttle) modes are special in that they dedicate the joystick to operations that are
not strictly speaking 'position-related'.
Hint: The buttons in the other joystick mode group (such as POS/SCALE, discussed
shortly) cannot be multi-selected with either LIVESET ZOOM or SHTL.
LIVESET ZOOM
Selecting LIVESET ZOOM assigns the joystick to control the zoom level and pan
position of the currently delegated M/E(s).
Use the joystick to control zoom and pan as follows:

To zoom in/out :
Page | 362