Table of Contents
Advertisement
Devices". This opens the audio
device control applet, allowing you
to choose among those available. (It
is sometimes useful to right-click in
this pane and enable "Show Disabled
Devices", as well.)
o Other third-party software solutions
exist as well. An Internet search for
terms like "audio loopback software"
or "virtual audio cable" will turn up
relevant links.
TriCaster has full-time video termination. If you need to loop through (or t-off from)
other video devices (such as an external monitor) prior to TriCaster in your video
pipeline, you should ensure termination is OFF for earlier devices.
A.1.16 CONFIGURE WIRECAST® TO RECEIVE TRICASTER'S NETWORK
To set up Telestream's Wirecast
as a source, follow these steps:
1. Double-click the main Program monitor to open TriCaster's Output
Configuration panel.
2. Select the desired audio and video sources for Network output, and enable it.
3. At the time of writing, Wirecast
you must also checkmark De-Interlace at the bottom of the Network video
source menu.
4. Next, open the Sources menu in the Wirecast
select the "New Web Stream" option.
Page | 432
A.1.15 ENABLE TERMINATION FOR VIDEO INPUTS?
software to recognize TriCaster's Network output
®
OUTPUT?
does not fully support interlaced video, so
®
interface (Figure 394), and
®
FIGURE 394
- Quick Links:
- A/V Input and Output
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TriCaster Mini and is the answer not in the manual?
Questions and answers
Can the switcher have a background still with PPT slides over top rightside of frame, and then have live camera feed on left?
Yes, the NewTek TriCaster Mini can display a background still with PowerPoint slides on the right side of the frame and a live camera feed on the left. It supports compositing live and video-on-demand inputs, including PowerPoint slides from a connected computer. The system allows for chroma key operations and mixing multiple video sources, enabling such a layout.
This answer is automatically generated
my tricaster only has one KEY option and two DSK options and 4 Mix Effect options. is there a way to add more of these items into my tricaster layout?
The TriCaster Mini includes Key layers in M/Es, which function similarly to Downstream Key (DSK) layers but are embedded upstream in the Mix Effect (M/E) output. However, the provided context does not mention the ability to add more KEY, DSK, or Mix Effect options beyond what is already available in the system.
This answer is automatically generated
Thank you for answering my question. There is a buzz on the output of our Tricaster410. Not sure why this is happening now.
A possible cause of a buzz or distortion on the output of a NewTek TriCaster Mini could be incorrect audio gain settings in the Output Configuration. Specifically, the gain controls for STREAM 1 and STREAM 2 may need to be adjusted. Setting the gain to -20 can eliminate distortion and align the output level with the TriCaster MASTER.
This answer is automatically generated