Table of Contents
Advertisement
use a switch or router rather than a direct connection between the two
devices, so TriCaster can also connect to the Internet, etc.
4. Power up TriCaster, and wait for the Start screen to appear; then press the
POWER button on the control surface.
AVID symbols briefly appear on the OLED display above each fader at this point.
When EuControl recognizes the control surface, the display shows rectangles in
place of the logo icons to tell you the control surface is in a 'ready' state.
Connectivity Notes: If the control surface OLED display continues to show the AVID
symbols, it has not been detected by EuControl. Try cycling the Artist Control power
off and then on again. If this does not help, power Artist Mix off, restart TriCaster, and
turn the surface on again. If Artist Mix is still not recognized, double-check your
connections. If more than one TriCaster is connected to the network, give each unit a
unique system name. If this fails (or when multiple TriCasters or Artist Mix devices are
on the same network) you may need to Exit to Windows, right-click the EuControl icon
(E) shown in the Notification Area of the Windows taskbar, select EuControl Settings
and and use the configuration tools provided therein.
documentation for further details.
5. Launch a TriCaster session. The OLED rectangle icons are replaced by custom
TriCaster audio control labels and displays.
FIGURE 373
When you first connect it to your TriCaster and open a TriCaster session, Artist Mix is
automatically configured to TriCaster's default Audio Mixer setup.
information display will look like Figure 373. Let's note in passing that this initial
layout may or may not match the Audio Mixer setup in your current TriCaster session.
We'll discuss how to customize this default configuration a bit later, but for now let's
consider basic navigation.
Page | 406
22.7.3 GETTING STARTED
Refer to the AVID®
The OLED
- Quick Links:
- A/V Input and Output
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TriCaster Mini and is the answer not in the manual?
Questions and answers
Can the switcher have a background still with PPT slides over top rightside of frame, and then have live camera feed on left?
Yes, the NewTek TriCaster Mini can display a background still with PowerPoint slides on the right side of the frame and a live camera feed on the left. It supports compositing live and video-on-demand inputs, including PowerPoint slides from a connected computer. The system allows for chroma key operations and mixing multiple video sources, enabling such a layout.
This answer is automatically generated
my tricaster only has one KEY option and two DSK options and 4 Mix Effect options. is there a way to add more of these items into my tricaster layout?
The TriCaster Mini includes Key layers in M/Es, which function similarly to Downstream Key (DSK) layers but are embedded upstream in the Mix Effect (M/E) output. However, the provided context does not mention the ability to add more KEY, DSK, or Mix Effect options beyond what is already available in the system.
This answer is automatically generated
Thank you for answering my question. There is a buzz on the output of our Tricaster410. Not sure why this is happening now.
A possible cause of a buzz or distortion on the output of a NewTek TriCaster Mini could be incorrect audio gain settings in the Output Configuration. Specifically, the gain controls for STREAM 1 and STREAM 2 may need to be adjusted. Setting the gain to -20 can eliminate distortion and align the output level with the TriCaster MASTER.
This answer is automatically generated