NewTek TriCaster Mini User Manual page 310

Hide thumbs Also See for TriCaster Mini:

Table of Contents

The entry above will 'remember' the current clip with the name "AAA1". (The

default for ID is an empty string, which is a valid storage target.)

net1 or net2

This command cues up content previously stored with a specified ID value on the

upstream source channel assigned to the network input designated.

For example:

The clip previously indexed as "AAA1" (using clip_store) is restored on the source

system output channel connected to Net 1. The playhead is set to the beginning

of the clip. (If the indexed clip is not located, nothing occurs.)

net1 or net2

Select a page (or clip) defined by the value assigned to index. This may be a number

specifying a particular page or at times, another property.

For example, sending a "clip_select" command to 3Play with a suitable numeric value

assigned as the "index" key selects a specific Play List tab by index (assuming Play List

mode is active. On the other hand, in Clip List mode, if the value for "index" was "0-

023" the clip referred to would be selected. For example:

clip_restore

clip_restore

Show Quick Links

Table of Contents