Table of Contents
Advertisement
Two rows at the bottom of the configuration panel are labeled Display. The
corresponding output ports are intended to supply video to projection systems or
other display devices.
The physical Display connectors may vary by model, but are typically presented
physically on TriCaster's rear connection panels as HDMI and either DVI or VGA ports.
No audio is supplied to these connectors.
When a downstream monitor is detected on a Display port, the corresponding
Resolution menu permits selection of a suitable resolution (typically, an incorrect
selection here will result in an 'out of range' error message being displayed on the
downstream device).
Switches provided at left in each row permit the Display ports to be selectively
disabled when they are not required.
Note: Some TriCaster Mini models also provide CASE DISPLAY setup features, providing
access to a number of useful display alternatives for the side-panel LCD screen.
Page | 150
- Quick Links:
- A/V Input and Output
Hide quick links:
Advertisement
Table of Contents
