Section 22.4 Tricaster™ 460 Cs & 860 Cs - NewTek TriCaster Mini User Manual


Preset selection: Press CTRL + LIVESET SHOT (1-8) to choose a preset for the
selected camera.

Press CTRL + RATE (M/E Transition group) to adjust the camera's Animation
Speed.
Hold down SHIFT and press the top joystick button to update the current PTZ preset
(position, zoom and thumbnail icon).
SECTION 22.4 TRICASTER™ 460 CS & 860 CS
The principle difference between these two members of the TriCaster family of
control surfaces is the number of channels supported by their namesake TriCaster
live production system.
TriCaster 860 CS is a bit wider than the 460 CS, as necessary to support the additional
channels offered by the larger TriCaster. As well, a few control groups are in slightly
different locations on the two control surfaces.
FIGURE 344
Page | 370