Configuring Tricaster; Overview - NewTek TriCaster Mini User Manual

TW-42 N Wherever items of special interest to TW-42 users appear in this chapter,
OTES
they will be flagged in the same manner as this paragraph.
1.
Connect a suitable video source to a camera input on your TriCaster live
production system.
2.
Select that source on the Switcher's Program row.
3.
Open TriCaster's Record Configuration panel and set the Primary Source (typically
to the Program option).
4.
Select a suitable encoding format for the captured files.
5.
Use the Add to menu in the Primary Recording controls to assign the recorded clips
to either DDR 1 or 2.
TriCaster 860 TW is quite straightforward to use, especially true if you are already
familiar with common TriCaster controls and features. In this section, we'll discuss
each part of the control surface, explaining how the various controls operate and what
effect they have, revealing a few little tricks that you may find helpful along the way.
TimeWarp provides convenient control over TriCaster's two DDRs as well as the
recording of sources configured for capture.
Page | 394

22.6.1 22.5.1 CONFIGURING TRICASTER

22.6.2 OVERVIEW