Inspection Of Push Rod Plate; Inspection Of Push Rod; Disassembly And Inspection Of Oil Pump - TOHATSU MFS 4D Service Manual

Power Unit

12) Inspection of Push Rod Plate

1. Check push rod plate for crack and damage. Replace if
necessary.

13) Inspection of Push Rod

1. Check push rod for bend, wear and damage. Replace if
necessary.
14) Disassembly and Inspection of Oil
Pump
1. Loosen oil pump cover mounting bolts and then pump cover
1.
Remove oil pump cover O ring 2 carefully.
2
3. Remove oil pump rotors (inner and outer) and oil pump pin,
check rotors 3 for damage, and replace if necessary.
5-26
1 1
2 2
3 3
4st 4/5/6 2020