Dss Console Key Assignment; Table 2-7 Function Number List - NEC SL1100 Programming Manual

SL1100
Level:
SA
Description
Use Program 30-03 : DSS Console Key Assignment to customize the key assignments for 60-
Program
button DSS Consoles. A DSS Console key can have any function with up to eight digits (e.g.,
extension number or Service Code).
30
To prevent lamp problems when reassigning DSS Console keys, clearing an extension programmed
key before reassigning it is recommended [Enter key to be cleared + 00 or
PC Programming, delete the key assignments and upload the change to the system before
proceeding.)] Without clearing an extension key first, the DSS Console may not show the correct lamp
display, although the DSS function works correctly.
If you are programming the system from the extension to which the DSS Console is connected, either
by phone or using the WebPro or PC Program, you may need to unplug the DSS and plug it back in to
reset the console lamping.
Input Data
Index 1
Index 2
Item No.
01
[1] General functional level (00 ~ 99, #00 ~ #99)
Function
Number
01
02
03
04
05
06
2-314
Program 30 : DSS/DLS Console Setup
DSS Console Number
Key Number
001 ~ 114

Table 2-7 Function Number List

Function Additional Data
DSS/One-Touch Extension Number or
any Numbers (up to
36 digits)
Microphone Key (ON/
OFF)
DND Key
BGM (ON/OFF)
Headset
Transfer Key

30-03 : DSS Console Key Assignment

Function Number
0 ~ 99, #0 ~ #99 (General
Functional Level)
00 ~ 99 (Appearance
* *
Functional Level)
LED Indication
On (Red) : DSS Ext. Busy
Off : DSS Ext. Idle, DND External, DND
Transfer, CFW Busy, CFW Noans, CFW
Busy/Noans, CFW Both, CFW FL ME
Fast Blink (Red) : DND Intercom, DND
All, CFW Imm
On (Red) : Mic On
Off : Mic Off
On (Red) : DND Setup
On (Red) : Active
On (Red) : Headset Operation
None
Program 30 : DSS/DLS Console Setup
ISSUE 6.0
00 (If using WebPro or
*
01 ~ 12
Additional Data
Refer to Table 2-7 Function
Number List on page 2-314.
Note