Dss Console Key Assignment; Table 2-6 Function Number List - NEC SL100 Programming Manual

SL1000
Level
SA
Description
Use Program 30-03 : DSS Console Key Assignment to customize the key assignments for 60-
Program
button DSS Consoles. A DSS Console key can have any function with up to four digits (e.g., extension
number or Service Code).
30
To prevent lamp problems when reassigning DSS Console keys, clearing an extension programmed
key before reassigning it is recommended [Enter key to be cleared + 00 or
Programming, delete the key assignments and upload the change to the system before proceeding.)]
Without clearing an extension key first, the DSS Console may not show the correct lamp display, al-
though the DSS function works correctly.
If you are programming the system from the extension to which the DSS Console is connected, either
by phone or using the WebPro or PC Program, you may need to unplug the DSS and plug it back in to
reset the console lamping.
Input Data
Index 1
Index 2
Item No.
01
[1] General functional level (00 ~ 99, #00 ~ #99)
Function
Number
01
02
03
04
05
06
07
2-298
Program 30 : DSS/DLS Console Setup
DSS Console Number
Key Number
001 ~ 060

Table 2-6 Function Number List

Function
DSS/One-Touch
Microphone Key (ON/OFF)
DND Key
BGM (ON/OFF)
Headset
Transfer Key
Conference Key

30-03 : DSS Console Key Assignment

Function Number
0 ~ 99, #0 ~ #99 (General
Functional Level)
00 ~ 99 (Appearance
* *
Functional Level)
Additional Data
Extension Number or On (Red) : DSS Ext. Busy
any Numbers (up to 36 Off : DSS Ext. Idle, DND External,
digits) DND Transfer, CFW Busy, CFW
Noans, CFW Busy/Noans, CFW
Both, CFW FL ME
Slow Blink (Red) : DND Inter-
com, DND All, CFW Imm
On (Red) : Mic On
Off : Mic Off
On (Red) : DND Setup
On (Red) : Active
On (Red) : Headset Operation
None
On (Red) : Conference Operation
Program 30 : DSS/DLS Console Setup
00 (If using WebPro or PC
*
01 ~ 12
Additional Data
Refer to Table 2-6 Function
Number List on this
LED Indication
ISSUE 1.1
page.
Note