Dss Console Key Assignment; Table 2-7 Function Number List - NEC SL1100 Programming Manual

ISSUE 4.0
Program 30 : DSS/DLS Console Setup
Level:
SA
Description
Use Program 30-03 : DSS Console Key Assignment to customize the key assignments for 60-
button DSS Consoles. A DSS Console key can have any function with up to eight digits (e.g.,
extension number or Service Code).
To prevent lamp problems when reassigning DSS Console keys, clearing an extension programmed
key before reassigning it is recommended [Enter key to be cleared + 00 or
PC Programming, delete the key assignments and upload the change to the system before
proceeding.)] Without clearing an extension key first, the DSS Console may not show the correct lamp
display, although the DSS function works correctly.
If you are programming the system from the extension to which the DSS Console is connected, either
by phone or using the WebPro or PC Program, you may need to unplug the DSS and plug it back in to
reset the console lamping.
Input Data
Index 1
DSS Console Number
Index 2
Item No.
01
[1] General functional level (00 ~ 99, #00 ~ #99)
Function
Function
Number
01 DSS/One-Touch
02 Microphone Key (ON/
OFF)
03 DND Key
04 BGM (ON/OFF)
05 Headset
06 Transfer Key
Programming Manual

30-03 : DSS Console Key Assignment

Key Number
001 ~ 114

Table 2-7 Function Number List

Additional Data
Extension Number or
any Numbers (up to
36 digits)
* 00 (If using WebPro or
01 ~ 12
Function Number
0 ~ 99, #0 ~ #99 (General
Functional Level)
* 00 ~ * 99 (Appearance
Functional Level)
LED Indication
On (Red) : DSS Ext. Busy
Off : DSS Ext. Idle, DND External, DND
Transfer, CFW Busy, CFW Noans, CFW
Busy/Noans, CFW Both, CFW FL ME
Fast Blink (Red) : DND Intercom, DND
All, CFW Imm
On (Red) : Mic On
Off : Mic Off
On (Red) : DND Setup
On (Red) : Active
On (Red) : Headset Operation
None
SL1100
Additional Data
Refer to Table 2-7 Function
Number List on page 2-313.
Note
2-313
Program
30