Program 26 : Ars Service; Automatic Route Selection (Ars/F-Route) Service - NEC SL1100 Programming Manual

SL1100

26-01 : Automatic Route Selection (ARS/F-Route) Service

Level:
IN
Description
Use Program 26-01 : Automatic Route Selection Service (ARS/F-Route) to define the system
Program
options for Automatic Route Selection (ARS/F-Route).
26
Input Data
Item
No.
01 ARS Service
02 Network Outgo-
ing Inter-Digit
ARS Time
03 ARS Misdialed
Number Han-
dling
06 Class of Service
Match Access
07 F-Route Access
COS Reference
Conditions
None
Feature Cross Reference
• Automatic Route Selection (ARS/F-Route)
2-306
Item Input Data
0 = Disabled (ARS
service is OFF.)
1 = Enabled (ARS serv-
ice is ON.)
0 ~ 64800 seconds
0 = Route to Trunk
Group 1
1 = Play Warning Tone
to Dialer
0 = Disabled (ARS
service is OFF.)
1 = Enabled (ARS serv-
ice is ON.)
0 = F-Route
1 = ARS

Program 26 : ARS Service

Description
Enable or disable ARS.
With Networking, this time replaces
20-03-04 when determining if all
network protocol digits have been
received. If ARS is enabled at Site
B, this time can be programmed for
5 (500 ms) at Site A. If ARS is disa-
bled and Site B is using F-Route for
outbound dialing, this time should
be programmed for 30 (three sec-
onds) at Site A.
If a user dials a number not pro-
grammed in ARS, this option deter-
mines if the system should route
over Trunk Group 1 or play error
tone.
This enables/disables the ARS class
of service settings.
ISSUE 6.0
Default Related
Program
0 26-02
26-03
26-04
30 20-03-04
0 21-02
0 26-02
0 26-02
44-05
Program 26 : ARS Service