Verified Account Codes; Using Account Codes And Speed Dial; Using Account Codes With Last Number Redial And Save; Account Codes And Emergency Calls - NEC DS1000 Product Description

Section 3: Features
28 N Section 3: Features
Verified Account Codes
With Verified Account Codes, the system compares the Account Code the user dials with a list of
codes programmed into the Verified Account Code Table. If the Account Code is in the table, the
call goes through (provided it is not prevented by an extension's Toll Restriction programming). If
the code is not in the table, the system prevents the call. Verified Account Codes, if enabled, apply
only to Forced Account Codes.

Using Account Codes and Speed Dial

To simplify Account Code operation, Personal and System Speed Dial bins can contain Account Codes.

Using Account Codes with Last Number Redial and Save

Last Number Redial and Save do not store Account Codes. This means that the user must manually
enter an Account Code to have it included with a call dialed using Last Number Redial and Save. If
Forced Account Codes are enabled, the system requires the user to enter the Account Code before it
outdials the stored number saved by Last Number Redial or Save.
An extension user can preselect a trunk for a Last Number Redial or Saved call.

Account Codes and Emergency Calls

Account Codes are never enforced for emergency (911 and 1+911) calls.

DSS Console Account Code Key

A keyset user can have an Account Code key on their DSS Console. It works the same as a keyset
Account Code key with the following exceptions:
G The DSS Console key flashes quickly red while the user is entering their Account Code. (The
keyset Account Code key flashes quickly green.)
G The DSS Console key lights red while the user is on a call for which they have entered an
Account Code. (The keyset Account Code key lights green.)
Feature Quick Steps
To enter an Optional (Unforced) Account Code:
1. Place or answer outside call + Press Account Code key, soft key, or dial # (if enabled).
2. Enter Account Code + Press Account Code key, soft key, or dial # (if enabled).
3. (Outgoing calls only) Dial outside number.
To enter a Forced Account Code:
1. Access line for outside call + Listen for 3 beeps + enter Account Code
2. Press Account Code key, soft key, or dial # (if enabled) + Dial outside number.
DS1000/2000 Product Description