Programmable Function Keys - NEC SL1100 Programming Manual

ISSUE 6.0
Program 15 : Extension, Basic Setup
Level:
SA
Description
Use Program 15-07 : Programmable Function Keys to assign functions to a multiline terminal line
keys.
For certain functions, you can append data to the key basic function. For example, the function 26
appended by data 1 makes a Group Call Pickup key for Pickup Group 1. You can also program
Function Keys using Service Codes.
To clear any previously programmed key, press 000 to erase any displayed code.
Input Data
Extension Number
Default Settings
Line Key
LK01
:
LK12
LK13
:
LK24
Item No. Item
01 Line Key Number
Function Number
Default
Programmable keys 1 ~ 8 are Trunk Line keys (key 1 = Trunk Line 1, key 2 = Trunk Line 2, etc.). All
other programmable keys are undefined.
Function Number List
Programming Manual

15-07 : Programmable Function Keys

Function Number
* 01 (Trunk Line Key)
:
01 (Trunk Line Key)
*
0 (No setting)
:
0 (No setting)
Input Data
1 ~ 24
0 ~ 99, #0 ~ #99
(Normal Function Code) (Service Code
751 by default)
00 ~ 99
* *
(Appearance Function Code) (Service
Code 752 by default)
Maximum eight digits
Additional Data
1
:
12
0
:
0
Additional Data
Refer to Table 2-2 Function Number
List on page 2-142.
Refer to Table 2-2 Function Number
List on page 2-142.
SL1100
Program
15
2-141