Incoming Call Trunk Setup - NEC SL1100 Programming Manual

ISSUE 6.0
Level:
IN
Description
Use Program 22-02 : Incoming Call Trunk Setup to assign the incoming trunk type for each trunk.
There is one item for each Night Service Mode.
Input Data
Trunk Port Number
Day/Night Mode
Item Item
No.
01 Incoming Type
Conditions
• When connecting to T1 trunks, after changing Program 22-02-01 to match the Telco connected T1
service type, the T1 cable or the T1 unit must be unplugged and then reconnected for the T1 unit to
sync.
• When the trunk type is set to 3 (DID), the DID Transfer to Destination in 22-11-04 for each DID
feature is not supported. This feature is supported only for DID trunks when assigned as VRS.
• When the trunk type is set to 3 (DID), the DID Intercept Destination feature for each DID is not
supported. This feature is supported only for DID trunks assigned as VRS.
Feature Cross Reference
• Central Office Calls, Answering
Programming Manual
Program 22 : Incoming Call Setup

22-02 : Incoming Call Trunk Setup

Input Data
0 = Normal Use this option to set the feature
1 = VRS (second dial type for the trunk you are program-
tone if no VRS instal- ming.
led)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID (DDI) Mode
Switching
001 ~ 084
1 ~ 8
Description Default
SL1100
Program
22
Related
Program
0 14-04
2-257