Remote Conference Group Setup - NEC SL1100 Programming Manual

ISSUE 6.0
Level:
SA
Description
Use Program 20-34 : Remote Conference Group Setup to define the Remote Conference options.
Input Data
Remote Conference Group Number
Item Item
No.
01 Conference Name
02 Password
03 Max participants
04 Max Conference Du-
ration
05 End Tone Alert Time
08 Automatic Recording
(V6.0 Added)
09 Recording Destina-
tion Mail Box (V6.0
Added)
Conditions
None
Feature Cross Reference
• Conference, Remote
Programming Manual
Program 20 : System Option Setup

20-34 : Remote Conference Group Setup

Input Data
Up to 12 characters Enter the name displayed at the time of a
Remote Conference. This entry will display
on the keyset LCD.
4 digits Fixed Define the password of a Remote Confer-
(0 ~ 9, @ = wild charac- ence.
ter)
0 ~ 16 Define the maximum number of partici-
pants of a Remote Conference.
0 ~ 64800 seconds Define the maximum duration of a Remote
Conference.
When this time passes, the conference is
disconnected by the SL1100.
0 ~ 64800 seconds Determine how long prior disconnecting a
Remote Conference call (based on the
maximum conference duration above) the
SL1100 should send out a beep. This is
used to warn the conference participants
of the pending disconnect.
0 = Disable Enable or Disable automatic recording for
1 = Enable a Remote Conference. If disabled, a line
key must be used to start recording.
1 ~ 128 Enter the mailbox number where record-
ings are to be stored.
1 ~ 4
Description
This is the mailbox number not the ex-
tension number for a mailbox.
SL1100
Program
20
Default
Group1 = Conf1
Group2 = Conf2
Group3 = Conf3
Group4 = Conf4
Group1 = 1111
Group2 = 2222
Group3 = 3333
Group4 = 4444
8
7200
300
0
No Setting
2-213