Program 21 : Outgoing Call Setup; System Options For Outgoing Calls - NEC SL1100 Programming Manual

Hide thumbs Also See for SL1100:
Table of Contents

Advertisement

ISSUE 6.0
Level:
IN
Description
Use Program 21-01 : System Options for Outgoing Calls to set the system options for Outgoing
Call Service.
Input Data
Item
Item
No.
01
Seizure Trunk
Line Mode
02
Intercom Interdi-
git Time
03
Trunk Interdigit
Time (External)
04
Dial Tone Detec-
tion Time
05
Disconnect Time
when Dial Tone
not Detected
06
Dial Pause at
First Digit
07
Toll Restriction
Override Time
08
Preset Dial Dis-
play Hold Time
09
Ringdown Exten-
sion Timer (Hot-
line Start)
Programming Manual

Program 21 : Outgoing Call Setup

21-01 : System Options for Outgoing Calls

Input Data
0 = Priority Route
Select the trunk based off the Trunk
1 = Circular Route
Route Priority (0) or based off the
trunk that has not been used in the
longest time (1).
0 ~ 64800 seconds
When placing Intercom calls, exten-
sion users must dial each digit in
this time.
0 ~ 64800 seconds
The system waits for this time to ex-
pire before placing the call in a talk
state (Call Timer starts after time ex-
pires, Voice Over and Barge-In is
not allowed until after time expires).
0 ~ 64800 seconds
If dial tone detection is enabled, the
system waits this time for the Telco
to return dial tone. When the time
expires, the system assumes dial
tone is not present. To disable this
time (and have the system wait con-
tinuously), enter 0.
0 ~ 64800 seconds
If 14-02-11 is enabled, the system
skips over a trunk if dial tone is not
detected. This option pertains to
calls placed using Speed Dial, ARS,
Last Number Redial or Save Num-
ber dialed. It does not pertain to line
key or Direct Trunk Access calls.
0 ~ 64800 seconds
0 ~ 64800 seconds
After dialing the Toll Restriction
Override codes, the system re-
moves Toll Restriction from the ex-
tension for this time.
0 ~ 64800 seconds
0 ~ 64800 seconds
A Ringdown extension automatically
calls its programmed destination af-
ter this time.
Description
Default
SL1100
Program
21
Related
Program
0
14-05
14-06
10
5
14-02-08
5
14-02-05
3
1
10
20-08-06
21-07
10
5
20-08-09
21-11
2-227

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents