Isdn Calling Party Number Setup For Extensions - NEC SL1100 Programming Manual

ISSUE 6.0

21-13 : ISDN Calling Party Number Setup for Extensions

Level:
IN
Description
Use Program 21-13 : ISDN Calling Party Number Setup for Extensions to assign each extension a
Calling Party Number (maximum 16 digits per entry). The calling number is the subscriber number of
the dial-in number. When a call is made by an extension which does not have an Extension Calling
Number assigned (Program 21-13), the system sends the calling number for the ISDN trunk defined in
Program 21-12.
If a Calling Party Number is assigned in both Programs 21-12 and 21-13, the system sends the data in
Program 21-13.
Input Data
Extension Number
Item Item
No.
01 Calling Party Number
Data
Conditions
None
Feature Cross Reference
• ISDN Compatibility
Programming Manual
Program 21 : Outgoing Call Setup
Input Data
Maximum of 16 digits (0 This program is used to assign a calling
~ 9, , #) party number per station.
*
Most Telco's will only ac- If CPN information is programmed on both
cept 10 digits. the trunk and station when a call is made
the CPN from the station will be sent to the
Telco.
Maximum eight digits
Description
SL1100
Program
21
Default
No Setting
2-243