Trunk Access Map Setup - NEC SL1100 Programming Manual

ISSUE 6.0
Level:
IN
Description
Use Program 14-07 : Trunk Access Map Setup to set up the Trunk Access Maps. This sets an
extension access options for trunks. For example, an extension can place only outgoing calls on
trunks to which it has outgoing access. There are 084 Access Maps with all 084 trunk ports
programmed in Map 1 with full access.
An extension can use one of the maps you set up in this program. Use Program 15-06 to assign Trunk
Access Maps to extensions. Each trunk can have one of eight access options for each Access Map.
Emergency calls will override Program 14-07 settings.
Input Data
Access Map Number
Item
Item
No.
01 Access 0 = No access
Map 1 = Outgoing access only
2 = Incoming access only
3 = Access only when trunk on Hold
4 = Outgoing access and access when trunk on
Hold
5 = Incoming access and access when trunk on
Hold
6 = Incoming and Outgoing access
7 = Incoming access, outgoing access and access
when trunk on Hold
Default
Access map No.
1
2
Programming Manual
Program 14 : Trunk, Basic Setup

14-07 : Trunk Access Map Setup

Input Data
Trunk Port No.
1
2
:
084
1
2
:
084
001 ~ 084
Description
Trunk Port Number = Refer below
001 ~ 084
Default
7 (T, R, H)
7 (T, R, H)
7 (T, R, H)
7 (T, R, H)
7 (T, R, H)
7 (T, R, H)
SL1100
Program
14
Default
:
:
2-119