NEC SL1100 Programming Manual page 254

SL1100
Item
No.
09 Restriction for
Common Speed
Dials
10 Restriction for
Group Speed Di-
als
Program
11 Intercom Call Re-
striction
21
12 PBX Call Restric-
tion
13 Restriction of Tie
Line Calls
Conditions
None
Feature Cross Reference
None
2-234
Item Input Data
0 = Does Not Restrict
1 = Following Restric-
tion Check
0 = Does Not Restrict
1 = Following Restric-
tion Check
0 = Disable (ICM call
not restricted.)
1 = Enable (ICM call re-
stricted.)
0 = Disable (PBX/CTX
call not restricted.)
1 = Enable (PBX/CTX
call restricted.)
0 = Disable (No)
1 = Enable (Yes)
Description
Use this option to enable/disable
Toll Restriction for Common Speed
Dialing numbers. If enabled, System
Speed Dialing numbers have the
same restrictions as manually dialed
numbers.
Use this option to enable/disable
Toll Restriction for Group Speed Di-
aling numbers. If enabled, Group
Speed Dialing numbers have the
same restrictions as manually dialed
numbers.
Determine if incoming intercom calls
are restricted.
Use this option to set how the sys-
tem Toll Restricts calls over PBX
trunks. If you enable PBX Toll Re-
striction, the system begins Toll Re-
striction after the PBX access code.
The user cannot dial a PBX exten-
sion. If you disable PBX Toll Restric-
tion, the system only restricts calls
that contain the PBX access code.
The system does not restrict calls to
PBX extensions. Refer to the PBX
compatibility feature. Make sure
Program 21-05-04 (Maximum Num-
ber of Digits Table Assignment) al-
lows for PBX Toll Call Dialing (nor-
mally 12 digits).
It chooses whether the toll restric-
tion of the dial set up by 34-08 is en-
abled or disabled.
Program 21 : Outgoing Call Setup
ISSUE 6.0
Default Related
Program
0
0
0
Class 1 ~ 6 = 0
Class 7 = 1
Class 8 ~ 15 = 0
0 34-08