Service Code Setup (For Hotel) - NEC SL1100 Programming Manual

ISSUE 6.0
Level:
IN
Description
Use Program 11-14 : Service Code Setup (for Hotel) to customize the Service Codes which are
used with the Hotel/Motel feature. You can customize additional Service Codes in Programs 11-10 ~
11-12, 11-15 and 11-16. The Service Codes can be used only at telephones registered as hotel
terminals in Program 42-02.
The following chart shows:
• The number of each code (01 ~ 19).
• The function of the Service Code.
• The type of telephones that can use the Service Code.
• The default entry.
Input Data
Item Item
No.
01 Set DND for Own Ex-
tension
02 Cancel DND for Own
Extension
03 Set DND for Other Ex-
tension
04 Cancel DND for Other
Extension
05 Set Wake Up Call for
Own Extension
06 Cancel Wake Up Call
for Own Extension
07 Set Wake Up Call for
Other Extension
08 Cancel Wake Up Call
for Other Extension
Programming Manual
Program 11 : System Numbering

11-14 : Service Code Setup (for Hotel)

Input Data
0~9, , # Maximum of 8
*
digit Determine what the service code should
be for an internal party to set DND for own
0~9, , # Maximum of 8
*
digit Determine what the service code should
be for an internal party to cancel DND for
0~9, , # Maximum of 8
*
digit Determine what the service code should
be for an internal party to set DND for an-
0~9, , # Maximum of 8
*
digit Determine what the service code should
be for an internal party to cancel DND for
0~9, , # Maximum of 8
*
digit Determine what the service code should
be for an internal party to set wake up call
0~9, , # Maximum of 8
*
digit Determine what the service code should
be for an internal party to cancel wake up
0~9, , # Maximum of 8
*
digit Determine what the service code should
be for an internal party to set wake up call
0~9, , # Maximum of 8
*
digit Determine what the service code should
be for an internal party to cancel wake up
Description
Terminal: MLT, SLT
extension.
Terminal: MLT, SLT
own extension.
Terminal: MLT, SLT
other extension.
Terminal: MLT, SLT
another extension.
Terminal: MLT, SLT
for own extension.
Terminal: MLT, SLT
call for own extension.
Terminal: MLT, SLT
for another extension.
Terminal: MLT, SLT
call for another extension.
SL1100
Program
11
Default
627
628
629
630
631
632
633
634
2-83