Section 5 Using Keys To Move Around In The Programs; Table 1-1 Keys For Entering Data - NEC SL1100 Programming Manual

ISSUE 6.0
3. The display shows "Complete Data Save" when completed and exits the telephone to an idle
mode.
To save a customer's database, a blank Compact Flash (CF) Card is required. Insert the CF Card into the
CPU and, using Program 90-03, save the software to the CF Card. (Program 90-04 is used to reload the
customer data if necessary.) Note that a CF Card can only hold one customer database. Each database to
be saved requires a separate drive.
S 5 USING KEYS TO MOVE AROUND IN THE PROGRAMS
ECTION
Once you enter the programming mode, use the keys in the following chart to enter data, edit data and
move around in the menus.
When you want to ...
Enter Data into program
Next Index
Prior Index
Select Data
All Clear
Register
Go Back to Prior Screen
Move Cursor Jump Up/Down
Delete single character
Next Page
Toggle between Number/Character
While in a Entering Number
Prior Page
Quit the programming
Move Cursor to Left
Change Program Number
Change Index Number
Programming Manual
CF card
CPU card
CF Slot (CN2)

Table 1-1 Keys for Entering Data

0 ~ 9,
*
Cursor Key (Up)
Cursor Key (Down)
Line Key (1 ~ 6)
Flash
Hold
Enter
Mute
Clear / Back
DND
Clear / Back
Help
Transfer
Speaker
Exit
Cursor Key (Left)
Soft Key1
Soft Key2
VMDB-C1
Telephone Programming
, # Line Key (1 ~ 6)
SL1100
1-3