NEC SL1100 Programming Manual page 433

ISSUE 6.0
Item Item
No.
05 Auto Erase/Save of
Messages
06 Message Retention
07 Recording Conversa-
tion Beep
08 Message Waiting
Lamp
09 Auto Attendant Direct
to Voice Mail
Programming Manual
Input Data
0 = Erase Use this option to determine what happens
After the subscriber lis- when a Subscriber Mailbox user complete-
tens to the entire new ly listens to a new message and then exits
message and hangs up, the mailbox without either saving (SA) or
InMail erases the mes- erasing (E) the message. Depending on
sage. the setting of this option, InMail either au-
1 = Save tomatically saves or erases the message.
After the subscriber lis- If the mailbox user hangs up before listen-
tens to the entire new ing to the entire new message, InMail re-
message and hangs up, tains the message as a new message.
InMail saves the mes-
sage.
0 ~ 99 Days Use this option to determine how long a
(0 = Indefinite) Subscriber Mailbox retains held and saved
messages. If a message is left in a Sub-
scriber Mailbox longer than this interval,
InMail deletes it.
0 = No (Disabled) (Rec Conv Beep)
1 = Yes (Enabled) Use this option to enable or disable the
Conversation Record beep. If enabled, all
parties on a call hear the voice prompt
"Recording", followed by a single beep
when the extension user initiates Conver-
sation Record. If disabled, the voice
prompt and beep do not occur. When you
disable the Conversation Record beep, the
following voice prompts do not occur while
InMail records the conversation:
Recording
(followed by a beep)
That mailbox is full
(if the mailbox message storage capacity
is reached)
You have reached the recording limit
(if the recorded message is too long)
Provides an additional Conversation Re-
cord beep. This beep repeats according to
the setting of Program 45-01-06 : Voice
Mail Integration Options : Record Alert
Tone Interval Time (0 ~ 64800 seconds).
To disable the Conversation Record beep,
enter 0 for this option.
0 = No (Disabled) (Update MW Lamp)
1 = Yes (Enabled) Use this option to enable or disable Mes-
sage Waiting lamping at the extension as-
sociated with the Subscriber mailbox. For
Subscriber Mailboxes, you should leave
this option enabled. For Guest Mailboxes,
you should leave this option disabled.
0 = No (Disabled) (Auto-ATT DND)
1 = Yes (Enabled) Use this option to enable or disable Auto
Attendant Do Not Disturb. When a sub-
scriber enables Auto Attendant Do Not
Disturb, an Automated Attendant caller
routes directly to the mailbox, hears the
greeting, and is asked to leave a message.
A subscriber can also enable Auto Attend-
ant Do Not Disturb while recording their
mailbox greeting.
Description
SL1100
Default
1
Program
0
47
1
1
0
2-413