Download Print this page
   

Advertisement

NEC SL1100
Operational Use
Handpiece
Speaker - Press Speaker button to activate/deactivate
Headset - Press Headset key to activate/deactivate
Speaker (Hands Free Operation)
Press Speaker Button to activate/deactivate
Ensure that the MIC button is on (by pressing the MIC button)
Indicated by RED Led in button
If MIC key is not on, the call is muted.
Volume Control
Volume Keys are the UP and Down key on Rotary button
Press UP or DOWN to change the volume whilst using each Function
Handpiece off hook [ Adjusts the handpiece volume ]
Speaker activated [ Adjust the speaker volume ]
Phone ringing volume [ While the phone is ringing ]
Phone LCD display [ Adjust the LCD contrast while phone is idle ]
Internal Call
Lift handpiece
Dial extn number or press one touch key
External Call
Lift handpiece
Dial 0 for outside line or select line key e.g. Line1
Then dial number
Placing Call on Hold
Whilst on a call
Press the HOLD key, you can place handpiece back down
Green Flashing LINE key is the call your Extn has on HOLD
Red Flashing LINE key is a call that another extn has on HOLD
Transferring Calls- Announced
Whilst on a call- place call on hold
Dial the extn number or press one touch key
Announce the call
Press Transfer key
Digital User Guide
- Simply lift handpiece to use

Advertisement

   Summary of Contents for NEC SL1100

  • Page 1

    NEC SL1100 Digital User Guide Operational Use Handpiece - Simply lift handpiece to use Speaker - Press Speaker button to activate/deactivate Headset - Press Headset key to activate/deactivate Speaker (Hands Free Operation) Press Speaker Button to activate/deactivate Ensure that the MIC button is on (by pressing the MIC button) Indicated by RED Led in button If MIC key is not on, the call is muted.

  • Page 2

    Transferring Calls- Unannounced Whilst on a call, place call on hold Dial the extn number or press one touch key Press the Transfer key, call then will transfer directly to extn Conference Calls Whilst on a call, press the Conf soft key Make additional call - internal or external Press Add soft key to then either add another call or Press Begin soft key to start the conference call...

  • Page 3

    Call Pick Up Direct Extn Lift handpiece Dial [ * * ] Then the extn number e.g 101 Call Pick Up Group Lift handpiece Dial [ * # ] will answer 1 call in the Call pick up group Do Not Disturb (DND) Leave handpiece on-hook Press Prog Soft key Press DND soft key...

  • Page 4

    Cursor Keys Operation  Menu Structure when PRG15-02-60 is set to Advanced Mode 1 The following table shows the menu structure of the Cursor Keys. You can reach the desired menu by pressing Navigation Keys (Up / Down / Right / Left) or dial 3 digits for shortcut access after pressing the “Enter Key”...

  • Page 5

    Cursor Keys Operation 500 : Phone Setting 520 : Display 521 : Contrast 522 : Minimum Brightness 523 : Maximum Brightness 524 : Backlight Threshold 525 : Auto Backlight 530 : Ring Options 531 : Ringing/ Voice Call 532 : Ringing Volume 533 : Ring Tones 540 : Key Touch Tone 550 : Headset...

  • Page 6

    Soft Keys Operation  “Menu” Soft Key The following table shows the menu structure of “Menu” Soft Key. You can reach the desired feature using the following operation. 3:03PM Menu VM:00 Prev Next Select Prev Next Select Back CL:00 Exit It is possible to search the desired feature by pressing Cursor the Keys (Up / Down / Right / Left) several times instead of “Prev”...

Comments to this Manuals

Symbols: 0
Latest comments: