NEC SL1100 Programming Manual page 52

SL1100
Item
No.
09 DNS Server IP Ad-
dress
10 DNS Port Number
11 Registrar Domain
Program
Name
12 Domain Name
10
13 Proxy Host Name
14 SIP Carrier Choice
(V1.5 Changed)
15 Registration Expiry
(Expire) Time
16 Register Sub Mode
17 DNS Source Port
20 Authentication Trial
(V5.0 Added)
21 Network Address Port
Translation (NAPT)
Router Setup (V5.0
Added)
Conditions
None
Feature Cross Reference
None
2-32
Item Input Data
0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
(Use Profile 1 Only)
(V5.0 Added)
0 ~ 65535
(Use Profile 1 Only)
(V5.0 Added)
Up to 128 Characters
Up to 64 Characters
Up to 48 Characters
(SIP Profile:1-2)
0 ~ 26
1 = Carrier A
2 = Carrier B
:
7 = Carrier G
8 = Carrier H
:
26 = Carrier Z
120 ~ 65535 seconds
0 = Off (Allow invalid In-
vite message)
1 = On (Deny invalid In-
vite message)
0 ~ 65535
(Use Profile 1 Only)
(V5.0 Added)
0 ~ 9
0 = No (Disable)
1 = Yes (Enable)
Description
If 10-29-08 is 1, this is effective. This sets
the IP address of the DNS server.
If 10-29-08 is 1, this is effective. This sets
the port number of the DNS server.
This sets the domain name of the registra-
tion server.
This specifies the domain name of the SIP
server.
This specifies the host name of the SIP
server.
This selects the carrier type of the SIP
server.
When Carrier A, B, or C is selected in
PRG10-29-14, PRG10-29-16 Register Sub
Mode is set "On" automatically.
This sets the expiration time when the SIP
trunk registers to the Sip server. When half
the time set here passes, the registration
update is automatically done.
Prevents an invalid Invite message. If the
"register information that system send to
SIP server" and the "Invite information that
system receive" are different, system
sends "404 Not Found" message. If
PRG10-29-05 Register Mode is 0; Off, it is
necessary to set 0; Off in PRG10-29-16.
(10-29-08 must be On)
This sets the DNS source port number.
This is how many times it will try an au-
thenticate before timing out and not regis-
tering.
If using an external NAPT Router or not.
Program 10 : System Configuration Setup
ISSUE 6.0
Default
0.0.0.0
53
No Setting
No Setting
No Setting
0
3600
0
53
1
0