Incoming Call Trunk Setup - NEC SL1100 Programming Manual

SL1100
Level:
IN
Description
Use Program 22-02 : Incoming Call Trunk Setup to assign the incoming trunk type for each trunk.
Program
There is one item for each Night Service Mode.
22
Input Data
Item
No.
01 Incoming Type
Conditions
• When connecting to T1 trunks, after changing Program 22-02-01 to match the Telco connected T1
service type, the T1 cable or the T1 unit must be unplugged and then reconnected for the T1 unit to
sync.
• When the trunk type is set to 3 (DID), the DID Transfer to Destination in 22-11-04 for each DID
feature is not supported. This feature is supported only for DID trunks when assigned as VRS.
• When the trunk type is set to 3 (DID), the DID Intercept Destination feature for each DID is not
supported. This feature is supported only for DID trunks assigned as VRS.
Feature Cross Reference
• Central Office Calls, Answering
2-256
Program 22 : Incoming Call Setup
Trunk Port Number
Day/Night Mode
Item Input Data
0 = Normal
1 = VRS (second dial
tone if no VRS instal-
led)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID (DDI) Mode
Switching

22-02 : Incoming Call Trunk Setup

Description
Use this option to set the feature
type for the trunk you are program-
ming.
Program 22 : Incoming Call Setup
ISSUE 4.0
001 ~ 084
1 ~ 8
Default Related
Program
0 14-04