Toshiba e-studio200l Service Handbook page 562

13)Black banding (at right angle with the feeding direction)
Defective area
Main charger
Fuser unit
High-voltage transformer
(Main charger / Developer
bias / Transfer charger)
Drum
Scanner
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
TROUBLESHOOTING
Fig. 5-13
Step Check items
1 Is the needle electrode dirty or
deformed?
2 Are the fuser roller, separation finger
for fuser roller and thermistor dirty?
3 Has the cleaning roller, pressure
roller, fuser roller and separation fin-
ger for fuser roller reached their PM
life?
4 Is the high-voltage transformer out-
put defective?
5 Is there a deep scratch on the drum
surface?
6 Is there thin scratch (drum pitting) on
the drum surface?
7 Is there a foreign matter on the car-
riage rail?
5 - 108
Prescription
Clean or replace the needle elec-
trode.
Clean them.
Replace them.
Adjust the output, or replace the
transformer.
Replace the drum if the scratch has
reached the aluminum base.
Check and adjust the contact condi-
tion of the cleaning blade and recov-
ery blade.
Remove the foreign matter.
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved