Toshiba e-studio200l Service Handbook page 698

- Detailed setting for the order
[ADMIN] > [SERVICE] > [SUPPLY ORDER SETUP] > [TONER ORDERING]
***** TONER ORDER
PART NUMBER
CONDITION
QUANTITY
AUTO ORDER
*1 The order is placed when the number of replacement reaches the number specified for the
CONDITION.
- FAX number of this equipment (common information)
[ADMIN] > [FAX] > [TERMINAL ID]
ID NAME
FAX NUMBER
- E-mail information of this equipment (common information)
[ADMIN] > [E-MAIL]
FROM ADDRESS
FROM NAME
*1 When sending an E-mail, validity of the address is checked. If the address is invalid, it is not
sent.
3) Output of setting list of the Auto Supply Order
Keying in the following buttons and keys prints the setting list.
[USER FUNCTIONS] [USER] [LISTS] [*] [#] [*] [*] [3] [8] [START]
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
REMOTE SERVICE
Order information (TONER)
Part number to be ordered
The number of conditions (*1)
The quantity to be ordered
ON/OFF setting of order for each part
ID name of this equipment
FAX number of this equipment
E-mail address of this equipment (*1)
E-mail username of this equipment
8 - 4
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved