Toshiba e-studio200l Service Handbook page 631

<Updating Engine ROM>
(1) Install the ROM to the download jig.
Make sure the direction is correct (P.6-33 "Fig. 6-35").
(2) Turn OFF the power of the equipment.
(3) Take off the connector cover.
(4) Remove the cover plate.
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
Connector cover
Fig. 6-52
Cover plate
Fig. 6-53
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
6 - 51
05/11
FIRMWARE UPDATING
6