Toshiba e-studio200l Service Handbook page 499

Hide thumbs Also See for e-studio200l:

Table of Contents

[ 4 ] Paper jam in saddle stitcher section

[EAB0] Saddle paper transport stop jam

Is there any paper remaining on the paper transport path in the saddle stitcher section in the

YES  Remove the paper.

Is the connector CN16 (folding position sensor) on the finisher controller PC board discon-

Is the harness connecting the finisher controller PC board and folding position sensor open-

YES  Connect the connector securely. Replace the harness.

Is the folding position sensor working properly?

Replace the finisher controller PC board.

[EAC0] Saddle transport delay jam

Is there any paper remaining on the paper transport path in the saddle stitcher section in the

YES  Remove the paper.

Is the connector CN16 (folding position sensor) on the finisher controller PC board discon-

Is the harness connecting the finisher controller PC board and folding position sensor open-

YES  Connect the connector securely. Replace the harness.

Is the folding position sensor working properly?

Replace the finisher controller PC board.

Replace the sensor.

e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283

TROUBLESHOOTING

Show Quick Links

Chapters

Table of Contents