Options - Toshiba e-studio200l Service Handbook

1.3

Options

1.3.1 e-STUDIO200L/230/230L/280/280S
Platen Cover
Reversing Automatic Document Feeder (RADF)
Drawer Module
Paper Feed Pedestal (PFP)
Large Capacity Feeder (LCF)
Finisher (Hanging type)
Saddle stitch Finisher
Hole Punch Unit
Staple Cartridge
Bridge Kit
Job Separator
Offset Tray
Key copy Counter, Key copy counter socket
Work Tray
Damp Heater
Fax Board
2nd Line for Fax Board
Wireless LAN Adapter
PCI Slot
Scrambler Board
Printer Kit
Printer/Scanner Kit
Scanner upgrade Kit
Parallel interface kit
Desk
Harness kit for coin controller
Automatic Duplexing Unit (ADU)
Slot cover
NIC board
Data overwrite kit
* 1) N: North America
Notes:
• The bridge unit (KN-3520) is necessary for installation of the finisher (MJ-1022, MJ-1025).
• The finisher (MJ-1025) is necessary for installation of the hole punch unit (MJ-6005N/E/F/S).
• The PCI slot (GO-1040) is necessary for installation of the scrambler board (GP-1030) and
parallel interface kit (GF-1140).
• GM-1030/GM-2030/GM-3030 are exclusive for e-STUDIO200L.
They do not operate with e-STUDIO230/230L/280/280S.
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
E: Europe F: France
1 - 7
05/11
KA-3511 PC/PC-C
MR-3016
MY-1021/-C
KD-1011/-C
KD-1012 A4/LT/A4-C
MJ-1022/-C
MJ-1025/-C
*1
MJ-6005 N/E/F/S
STAPLE-1600 (for MJ-1022)
STAPLE-2000 (for MJ-1025)
KN-3520/-C
MJ-5004/-C
MJ-5005/-C
MU-8, MU-10
KK-3511
MF-2320 U/E
GD-1150 NA/AU/EU/TW/C/AS
GD-1160 NA/EU/TW/C
GN-1010
GO-1040/C
GP-1030
GM-1020/GM-1030
GM-2020/GM-2030
GM-3020/GM-3030
GF-1140
MH-1700
GQ-1020
MD-0102
KE-2330
GF-1150
GP-1050
S: Sweden
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
1