Toshiba e-studio200l Service Handbook page 60

• List print mode (9S): The procedure varies depending on the code.
[9][START]
(Code)
[POWER]
101: Adjustment mode (05)
102: Setting mode (08)
(Code)
103: PM support mode
104: Stored information of pixel counter (toner cartridge reference)
105: Stored information of pixel counter (service technician reference)
106: Error history
• PM support mode (6S):
[6][START]
[POWER]
• Firmware update mode (89): Refer to "6. FIRMWARE UPDATING".
Normal
Control panel
Warming up
check mode
Ready
[POWER]
OFF
*1
To user
*1 Turn OFF the power after using the self-diagnosis modes, and leave the equipment to the user.
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
ERROR CODE AND SELF-DIAGNOSTIC MODE
[START] [Digital keys]
Key in the first
code to be printed
(Code)
1: Auto-toner adjustment
2: PM Support Screen
[POWER]
ON
[0][1] [0][3] [0][4]
Test print Adjustment
Test mode
mode
State transition diagram of self-diagnosis modes
[START] [Digital keys]
Key in the last
code to be printed
[START]
(Operation started)
[0][5] [0][8] [9][START]
List print
Setting
mode mode
mode
Fig. 2-1
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
2 - 24
[START] [POWER] OFF/ON
List starts to (Exit)
be printed
[POWER] OFF/ON
(Exit)
[6][START] [8][9]
Firmware
PM support
update mode
mode