Toshiba e-studio200l Service Handbook page 250

Setting mode (08) <e-STUDIO202L/203L/232/233/282/283>
Classifi-
Code
cation
1410 Counter Counter for period of toner
cartridge rotation time
1411 Counter Counter for envelope
1422 Data HDD data overwriting type
overwrite setting
kit
1424 Data HDD data clearing type
overwrite setting (forcible clearing)
kit
1426 Data Forcible HDD data clearing
overwrite
kit
1427 Data Forcible NVRAM data all
overwrite clearing
kit
1428 Data Forcible SRAM backup
overwrite data all clearing
kit
1429 User Margin width
interface (Top/Bottom, Left/Right)
1430 User Margin width
interface (Bookbinding margin)
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
ERROR CODE AND SELF-DIAGNOSTIC MODE
Func-
Items
tion
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
2 - 214
07/11
Default
<Accept-
RAM
able
value>
0 M Counts up the period of
<8 digits> rotation time of the
toner cartridge.
0 M Counts up when the
<8 digits> registration sensor is
ON.
When the counter value
of the fuser roller is
reset, this counter is
reset in sync at the PM
support mode.
0 SYS Select the type of the
<0-2> overwriting level; LOW,
MEDIUM, or HIGH for
deleting HDD data.
(This setting is enabled
only when the GP-1060
is installed.)
0: LOW
1: MEDIUM
2: HIGH
0 SYS Select the type of the
<0-2> overwriting level; LOW,
MEDIUM, or HIGH for
deleting HDD data.
(This setting is enabled
only when the GP-1060
is installed.)
0: LOW
1: MEDIUM
2: HIGH
- - HDD data is cleared in
the procedure set in 08-
1424.
* This setting is
enabled only when
the GP-1060 is
installed.
- - When this code is per-
formed, the equipment
cannot be started up.
* This setting is
enabled only when
the GP-1060 is
installed.
- - When this code is per-
formed, the equipment
cannot be started up.
* This setting is
enabled only when
the GP-1060 is
installed.
Front: 7/ SYS This setting is not
Back: 7 reflected in "Right",
<2-100/- even if the value less
100-100> than 2 is set for "Back".
14 SYS
<2-30>
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
Proce-
Contents
dure
1
1
1
1
3
3
3
10
1