Toshiba e-studio200l Service Handbook page 552

3) Moire/lack of sharpness
Moire
Defective area
Density reproduction
Parameter adjustment
value
Printer section
Lack of sharpness
Defective area
Density reproduction
Parameter adjustment
value
Printer section
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
TROUBLESHOOTING
A
Fig. 5-3
Step Check items
1 Check the reproduction of the image
density.
2 Check the image processing param-
eters.
3 Check test print image (04-113).
Step Check items
1 Check the reproduction of the image
density.
2 Check the image processing param-
eters.
3 Check test print image (04-113).
4 Check the image processing param-
eters.
5 - 98
Prescription
Adjust the density.
Check the adjustment value for
sharpness.
When defects occur, perform the cor-
responding troubleshooting proce-
dure.
Prescription
Adjust the density.
Check the adjustment value for
sharpness.
When defects occur, perform the cor-
responding troubleshooting proce-
dure.
Check the encircled areas A and B in
the image, and change the sharp-
ness intensity in the sharpness
adjustment mode.
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
B