Toshiba e-studio200l Service Handbook page 615

(4) Connect the download jig with the jig connector (CN100) on the SYS board.
(5) Turn ON the power while [8] button and [9] button are pressed simultaneously.
The screen for selecting the items to be updated is displayed. "*" is displayed next to the items to
be updated. (All items are selected in the default settings.)
When the FROM basic section software version to be updated is "V1.00 / 1.12" or earlier:
When the FROM basic section software version to be updated is "V1.00 / 4.22" or later:
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
Connector
Fig. 6-37
Fig. 6-38
Fig. 6-39
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
6 - 35
06/10
FIRMWARE UPDATING
6