Adjustment Of Smudged/Faint Text - Toshiba e-studio200l Service Handbook

3.3.6

Adjustment of smudged/faint text

The smudged/faint text can be set at the following codes.
< e-STUDIO 200L/230/230L/280 >
Original mode
Text/Photo
653 Adjustment of smudged/faint
(928) spotted text
< e-STUDIO 202L/203L/232/233/282/283 >
Original mode
Text/Photo
648 Adjustment of smudged/faint
(928) spotted text
* The values in "( )" are the adjustment codes of the Custom Mode.
Make a test copy and compare the image obtained with the current settings; if necessary, make
adjustment using the following procedure.
<Procedure>
Procedure is same as that of  P.3-21 "3.3.1 Density adjustment".
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
Item to be adjusted
Item to be adjusted
3 - 25
10/06
< Adjustment Mode (05) >
Remarks
When the value increases, the faint text is improved.
When the value decreases, the smudged text is
improved.
Acceptable values: 0 to 255 (Default: 192)
Note: Note:
Remember the image specifications and life
span of the replacing parts may not meet the
standard when the setting value is changed
from the default value.
Remarks
When the value increases, the faint text is improved.
When the value decreases, the smudged text is
improved.
Acceptable values: 0 to 4 (Default: 2)
Note: Note:
Remember the image specifications and life
span of the replacing parts may not meet the
standard when the setting value is changed
from the default value.
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
3
ADJUSTMENT