Toshiba e-studio200l Service Handbook page 227

Setting mode (08) <e-STUDIO202L/203L/232/233/282/283>
Classifi-
Code
cation
659 User Auto Job start setting for
interface bypass feed printing
660 Network Auto-forwarding setting of
received FAX
661 Network Auto-forwarding setting of
received E-mail
662 General Clearing of SMS partition
666 General /SHR partition clearing
667 General /SHA partition clearing
670 General HDD diagnostic menu dis-
play
671 User Size indicator
interface
672 General Initialization of department
management information
673 General Trial period setting
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
Default
Func- <Accept-
Items
tion
value>
PPC
ALL
ALL
ALL
ALL
ALL
ALL
ALL
-
PRT/
SCN <1-60>
2 - 191
07/11
RAM Contents
able
1 SYS Sets whether or not
<0-1> feeding a paper auto-
matically into the equip-
ment when it is placed
on the bypass tray.
0: OFF (Press the
[START] button to
start feeding.)
1: ON (Automatic
feeding)
0 SYS 0: Invalid
<0-1> 1: Valid
0 SYS 0: Invalid
<0-1> 1: Valid
- SYS Clears SMS partition.
(Performs when the
service call [F106] has
occurred.)
- SYS Initializes the Elec-
tronic Filing.
- SYS Initializes the shared
folder.
- SYS Display the HDD infor-
mation
0 SYS 0: Invalid
<0-1> 1: Valid
- SYS Initializing of the depart-
ment management
information
* Key in the code and
press the [INITIAL-
IZE] button to per-
form the
initialization. If the
area storing the
department man-
agement informa-
tion is destroyed for
some reason, "Enter
Department Code"
is displayed on the
control panel even if
the department
management func-
tion is not set on. In
this case, initialize
the area with this
code. This area is
normally initialized
at the factory.
254 SYS Sets the trial period
from 1 to 60 days. This
setting is effective only
when the default value
is "254". Once the
default value is set, this
value is only used for a
reference.
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
ERROR CODE AND SELF-DIAGNOSTIC MODE
Proce-
dure
1
2
1
1
3
3
3
2
1
3
1