(3)
After winding the wires around the pulleys, attach the wire holder jigs not to loosen the wires.
Notes:
•
When the wire holder jig is attached, make sure that the wire is not shifted or loosened.
•
The wire should come out of the slot of the wire holder jig and be passed through between the
arm and the jig.
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
ADJUSTMENT
Wire holder jig
Fig. 3-34
3 - 46
Arm
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved