[B]
Adjustment
(1)
Close the RADF.
(2)
Adjust it by turning the adjustment screws on the hinges.
•
Adjust the height on the rear side by means of the screw on the hinge on the feed side of the
RADF.
Turn it clockwise ................. Heightened
Turn it counterclockwise ...... Lowered
•
Adjust the gap on the rear side by means of the screw on the hinge on the feed side of the
RADF.
Turn it clockwise .................. Lowered
Turn it counterclockwise ...... Heightened
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
ADJUSTMENT
Fig. 3-93
Fig. 3-94
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
3 - 76
05/11