Toshiba e-studio200l Service Handbook page 72

[FAX] button: ON ([FAX] LED: ON)
Digital
Button
key
A
B
C 24 V power supply
D IPC board connection
[1]
E
F Polygonal motor rotation status (Motor is rotating at Output
Mode (03))
G Auger lock switch
H Toner cartridge installation switch
A Registration sensor
B Exit sensor
C Auto-toner sensor connection
D Front cover opening/closing switch
[2]
E
F Side cover opening/closing sensor
G Transfer cover opening/closing switch
H Main motor rotation status (Motor is rotating at Output
Mode (03))
A
B Key copy counter connection
C Job Separator upper stack sensor
(When Job Separator is installed)
Offset Tray separate sensor (When Offset Tray is installed)
D Fuser unit connection
E Bridge unit transport sensor-2 (When bridge unit is
installed)
F Bridge unit cover opening/closing detection switch
(When Bridge unit is installed)
[3] Job Separator cover switch (When Job Separator is
installed)
Offset Tray cover switch (When Offset Tray is installed)
G Bridge unit paper full detection sensor
(When bridge unit is installed)
Job Separator lower stack sensor
(When Job Separator is installed)
Offset Tray stack sensor (When Offset Tray is installed)
H Bridge unit transport sensor-1 (When bridge unit is
installed)
Job Separator feed sensor (When Job Separator is
installed)
Offset Tray feed sensor (When Offset Tray is installed)
A
B
C
D
[4]
E
F Bypass feed sensor
G
H High-voltage power supply abnormality (shutdown) detec-
tion
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
ERROR CODE AND SELF-DIAGNOSTIC MODE
Items to check
-
-
-
-
-
-
-
-
-
-
-
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
2 - 36
05/11
Contents
Highlighted Normal dis-
display play
e.g. e.g.
- -
- -
Power ON Power OFF
Not connected Connected
- -
Abnormal rota- Normal rota-
tion tion
Lock Unlock
OFF ON
Paper present No paper
Paper present No paper
Not connected Connected
Cover opened Cover closed
- -
Cover opened Cover closed
Cover opened Cover closed
Abnormal rota- Normal rota-
tion tion
- -
Not connected Connected
Paper full Paper not full
Separator at Other than
home position home position
Fuser unit Fuser unit not
installed installed
No paper Paper present
Cover opened Cover closed
Cover opened Cover closed
Cover opened Cover closed
Paper not full Paper full
Paper full Paper not full
Paper full Paper not full
No paper Paper present
Paper present No paper
Paper present No paper
- -
- -
- -
- -
- -
No paper Paper present
- -
Normal Abnormal