Toshiba e-studio200l Service Handbook page 685

[D] Display during the update (When the FROM basic section software version of the equip-
ment is "V1.00 / 4.22" or later:)
Update is performed in parallel as shown in the transition diagram below.
[ System ROM ]
1. OS UI Update
Below is an example of the changes of the LCD screen during update.
Turn ON the power while [4] button and [9] button are pressed simultaneously
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
Item Selection Screen for Update
[ Master data ] [ Engine ROM ]
2. HDD SYS Update
Firmware Update
Update Completed
Fig. 6-109
The initial screen is displayed and the recogni-
tion of the USB storage device connected to
the equipment is started.
When the device is recognized properly, the
screen for selecting update items is displayed.
6 - 105
06/09
[ Scanner ROM ]
3. Engine 4. Scanner
Firmware Update
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
FIRMWARE UPDATING
6