Toshiba e-studio200l Service Handbook page 283

Setting mode (08) <e-STUDIO202L/203L/232/233/282/283>
Classifi-
Code
cation
3864 Disclosing Telnet Server
Network
function
3865 Network Availability of Telnet Server
3866 Telnet Server
Network
TCP port number
3867 Telnet Server
Network
Server administrator's user
name
3868 Telnet Server
Network
Server administrator's
password
4016-0 Paper ACC function
feeding when a
drawer is
specified
4016-1
4621 Paper Bypass paper size detec-
feeding tion setting
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
Default
Func- <Accept-
Items
tion
value>
ALL
ALL
ALL
65535>
ALL
mum 15
letters>
ALL System
mum 15
letters>
Copying ALL
Printing / ALL
BOX print-
ing
PPC/
PRT
2 - 247
10/06
RAM Contents
able
0 SYS Disclosure of Telnet
Server function is
<0-1>
switched.
0: Not disclosed
1: Disclosed
2 NIC Availability of Telnet
<1-2> Server is switched.
1: Enabled
2: Disabled
23 A port number for Tel-
NIC
<1- net Server is set.
Admin A user name for the Tel-
NIC
<Maxi- net Server administra-
tor is confirmed.
A password for the Tel-
NIC
<Maxi- net Server administra-
tor is set.
0 SYS Sets whether the ACC
<0-1> function is enabled only
for automatic drawer
selection or enabled
when a particular
drawer is specified as
well.
0 SYS
0: Enabled only for
<0-1>
automatic drawer
selection
1: Enabled when a
drawer is specified
0 M Detects whether the
size of paper fed by
<0-1>
bypass feeding is the
same as the paper size
set on the control panel.
If the sizes are not the
same, the warning mes-
sage is displayed
(Paper jam does not
occur). When the
bypass paper size
detection is broken, the
equipment can be used
without the size detec-
tion by disabling this
setting. After repair,
enable this setting.
0: Enabled
1: Disabled
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
ERROR CODE AND SELF-DIAGNOSTIC MODE
Proce-
dure
1
2
12
12
12
12
4
4
1