Toshiba e-studio200l Service Handbook page 75

[FAX] button: OFF/ [COPY] button: ON ([FAX] LED: OFF/ [COPY] LED: ON)
Digital
Button
key
A Dongle (for Printer/Scanner kit (GM-2070 or 2080U)) Con-
nected
B Dongle (for Printer kit (GM-1070, 1071, 1080U or 1081U))
Connected
C Dongle (for Scanner kit (GM-4070 or 4080U)) Connected
[0]
D Dongles for other equipments/Other USB devices Con-
nected
E Judgement for acceptable USB storage device (*1)
F
G
H
*1
• Be sure to install the USB storage device to the equipment and check if the device can be used
with this code.
• Be sure to turn OFF the write protection (the function to prevent data from erasure by the acci-
dental recording or deleting) of the USB storage device before performing the check, otherwise
this code cannot be used.
• It may take some time (2 sec. to 10 sec.) before this check is completed depending on the USB
storage device.
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
Items to check
-
-
-
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
2 - 39
07/11
Contents
Highlighted Normal dis-
display play
e.g. e.g.
Connectable Not connect-
able
Connectable Not connect-
able
Connectable Not connect-
able
Connectable Not connect-
able
Acceptable Not acceptable
-
-
-
ERROR CODE AND SELF-DIAGNOSTIC MODE
2
-
-
-