Toshiba e-studio200l Service Handbook page 674

(6) Select the item with the digital keys.
"*" is displayed next to the selected item. Display or delete the "*" by pressing the number of the
item. All items are selected in the default settings.
• Select all items to update the firmware of the equipment in a batch.
• Select items as follows to update individually.
<Items vary depending on the FROM basic section software version
Types of Firmware
System ROM 0. OS Update
(OS data)
System ROM 2. UI Data Update
(UI data)
Master data 1. HDD Update
System ROM 3. System Firmware Update
(System firmware)
Engine ROM 4. Engine Firmware Update
Scanner ROM 5. Scanner Firmware Update
Example: Updating the master data and system ROM
When the FROM basic section software version of the equipment is "V1.00 / 1.12" or earlier:
When the FROM basic section software version of the equipment is "V1.00 / 4.22" or later:
(Updating all the items is taken as an example and explained in the following procedures.)
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
FIRMWARE UPDATING
of the equipment>
"V1.00/1.12" or earlier
Fig. 6-100
Fig. 6-101
6 - 94
06/10
Items
"V1.00/4.22" or later
1. OS UI Update
2. HDD SYS Update
3. Engine Firmware Update
4. Scanner Firmware Update
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved