Create Multicast_Fdb - D-Link DGS-3100 SERIES Cli Manual

create multicast_fdb

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create multicast MAC forwarding:
config multicast_fdb
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To add multicast MAC forwarding:
To create a static entry in the multicast MAC address forwarding
table (database).
create multicast_fdb <vlan_name 32> <macaddr>
The create multicast_fdb command creates a static entry in the
multicast MAC address forwarding table (database).
<vlan_name 32> − The name of the VLAN on which the MAC
address resides.
<macaddr> − The MAC address that will be added to the forwarding
table.
Only Administrator or operator-level users can issue this command.
DGS3100# create multicast_fdb default 01-00-5E-00-00-00
Success.
DGS3100#
To configure the Switch's multicast MAC address forwarding
database.
config multicast_fdb <vlan_name 32><macaddr> [add | delete]
<portlist>
The config multicast_fdb command configures the multicast MAC
address forwarding table.
<vlan_name 32> − The name of the VLAN on which the MAC
address resides.
<macaddr> − The MAC address that will be added to the forwarding
table.
add − Specifies that the MAC address is to be added to the
forwarding table. Delete will remove the MAC address from the
forwarding table.
delete − Specifies that the MAC address is to be removed from the
forwarding table.
<portlist> − A port or range of ports to be configured.
Only Administrator or operator-level users can issue this command.
DGS3100# config multicast_fdb default 01-00-5E-00-00-00 add 1
Success.
DGS3100#
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
72