Show Ports Security - D-Link xStack DWS-3200 Series Cli Manual

DXS/DWS-3200 series CLI Reference Guide

show ports security

The show ports security Privileged EXEC mode command displays the port-lock status.
Syntax
show ports security [ethernet interface | port-channel port-channel-number]
Parameters
•
interface — A valid Ethernet port.
•
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all classes of entries in the port-lock status are displayed:
Console# show ports security
Port Status
---- -------
1/1 Locked
1/2 Unlocked
1/3 Locked
The following table describes the fields shown above.
Field
Port
Status
Learning
Action
Maximum
Learning Action
-------- -------
Dynamic Discard
Dynamic -
Disabled Discard,
Shutdown
Des cription
The port number.
The values are: Locked/Unlocked.
The learning mode.
Action on violation.
The maximum number of addresses that can be associated on this port in the-
Static Learning mode or in the Dynamic Learning mode.
Maximum Trap
------- -------
3 Enable
28 -
8 Disable
Page 65
Frequency
---------
100
-
-